Kifco Products

A-Series Water-Reels®
B-Series Water-Reels®
Slurry Reels
PTO Pumps
Slurry Pumps
Hose Clamps
      

Repair Parts Manuals
       
Product Uses

Agriculture
Horse Arenas & Pastures
Dust Control
Athletic Turf
Golf Courses
Cemeteries
Composting
      

Dealer Locator
 
Technical Details

B-Series Chart
A-Series Chart
       

Request Info
Call for Your Nearest Dealer:
(309) 543-4425

Kifco
707 S. Schrader Ave.
P.O. Box 290
Havana, IL 62644 USA
Phone: 309.543.4425
Fax: 309.543.4945

Slurry Pumps

NT120S & FRT94/35 Slurry Pumps

Bottom discharge assmbly shown with power primerNT120S Pump Model

Single stage, closed impeller, centrifugal pump with a mechanical seal and integral gearbox. The wide design impeller is capable of passing at maximum 5/8" solid. Four gearbox ratios are available. Two are designed for PTO pumps with input speeds of 540rpm or 1000rpm. The other two are made to run direct from an engine. The direction of rotation for the engine driven pumps is opposite to the PTO pumps.

FRT94/35 Pump Model

Side discharge assembly shown with power primerSingle stage, open impeller centrifugal pump with a mechanical seal and integral gearbox. It will pump most animal waste slurries except long fibrous material which must first run through a chopper. The pump includes a stationary knife which will slice through materials that build up at the eye of the impeller. The pump is very aggressive with the material being pumped. The pump volute and impeller are made from spheroidal graphite (SG) iron which is twice as strong and four times tougher than regular iron. The input speeds are the same as the NT120S above.

PTO Pumps

PTO Pumps are mounted on heavy duty carts. The cart for the bottom discharge assembly is fitted with 6.70 - 15 wheels. The cart for the side discharge assembly is fitted with 4.80 - 12 wheels. Pumps mounted on carts are available with the PTO drive shaft only or fully fitted as described here.

Unfitted Pumps include:
Fitted Pumps as shown plus:
Bare Pump
Pump Cart
PTO Drive

Discharge Fitting
4" Heavy-duty Discharge Valve
Suction Fitting c/w Check Valve
6" Suction Hose Adapter
Priming Pump c/w Easy Flush Line
Pressure Gauge
Gauge Protector

Optional Equipment

Optional Equipment

  • Power Primer: power primer is driven by a v-belt from a pulley mounted on the pump PTO input shaft.
  • Lever-Loc 90ø bend: Allows the suction hose to be used at an angle to the suction inlet.
FRT Pump Stationary Knife

FRT Pump Stationary Knife

 View of the eye of the impeller and the      knife.

Pump Performance (Maximum Recommended  Impeller Speed: NT120S= 3,200rpm,FRT 94/35 =2,900rpm)

Model Impeller Speed rpm GPM 200 300 400 500 600 700 800
NT120S 3100 PSI
HP
153
41
152
48
150
56
148
65
144
79
-
-
-
-
2700 PSI
HP
112
30
112
37
112
43
110
51
106
60
-
-
-
-
FRT
94-35
2900 PSI
HP
230
30
230
100
229
116
227
127
220
140
210
153
190
164
2500 PSI
HP
172
59
170
70
170
78
168
91
160
102
150
110
147
129
2000 PSI
HP
105
36
104
41
102
46
100
53
95
60
87
67
70
72

Standard Gearbox Ratios

Input Speed rpm Ratio Pump Shaft
540          NT/FRT 1 : 5.7

1 3/8" dia x 6 spline

1000        NT/FRT 1 : 3.2 1 3/8" dia x 6 spline
2000           NT    1 : 1.55 40mm dia x 10mm keyway
2000          FRT 1 : 1.38 40mm dia x 10mm keyway

Weights & Dimensions

NT120S
FRT94/35
Bottom Discharge 55"Wx70"Lx38"H 800 lbs
NT120S
FRT94/35
Side Discharge 48"Wx70"Lx39"H 750 lbs
 

Copyright © 2002, Kifco
Water-Reel® is a registered name belonging to Kifco