[To Main Page]
707 S. Schrader Ave.
P.O. Box 290
Havana, IL 62644 USA
Phone: 309.543.4425
Fax: 309.543.4945
E-mail: parts@kifco.com

Water-Reel(TM) Irrigation

A-Series Kits

Notice: This portion of the website is new and will be undergoing constant updates over the next 3 months. Please check periodically for new on-line parts manuals and let us know what you think by emailing us at parts@kifco.com. Thanks!

updated 11/17/03 Rc

25A/27A (A1)

5.3 Gal. Tank Kit 25/27A
This kit converts a engine drive from a 2 gal. to a 5.3 gal. gas tank. It includes the mounting brackets, Tank, fuel filter, gas line, and clamps.

990-7078-0

30A/33A 310,000 to 359,999 (D2)

Engine Drive Kit - D2
This kit converts a turbine drive to a mechanical engine drive. It includes the mounting brackets and linkages for the engine drive. It does not include the engine or gearbox.

599-0115-3 (3" Inlet)

599-0115-4 (4" Inlet)

Engine Selection - D2 Engine only. This does not include any mounting brackets or the gearbox.	599-0442-0 (Honda )	500-0387-0 (Subaru)
Gearbox Kit - D2 This kit is required when converting a hydraulic engine drive to a mechanical engine drive. This kit contains a gearbox, idler arm, tachometer bracket, and assorted pulleys. It does not include the engine mounting brackets or the engine (see above). There are no installation instructions available for this kit.	990-7066-0
KIT TURB. BEARING UPGRADE -10/50 This kit has the following, BRNG,5204-2RS, SHIM,28MM OD 20MM ID X1MM, SHIM,MYLLAR 16.2X23.8X.25, SEAL,20 X 6, SEAL 25MMX47MMX7MM, SPACER, SPACER	990-7047-0
KIT, RUNNER OVERHAUL - 25/120 This kit has the following BRNG,6204-2RS, BRNG,5204-2RS, RETAINING, RING E20,STOP RING,KEY 5 X 10, SEAL,20 X 6, O-RING, O-RING 2.36 ID X .103 C/S, TURBINE HUB T 200 25/120, SHAFT,IMPELLER 25/120, KEY 6 X 50, SPACER 1.795 LONG	990-7030-0

37A 370,000 + (AR6)

Tandem Axle Kit
This kit converts a Two Wheel to a Four wheel. It includes the mounting brackets and wheels, hubs, spindles

990-7082-0

37A 310,000 to 359,999 (FF1)

Engine Drive Kit - FF1
This kit converts a turbine drive to a mechanical engine drive. It includes the mounting brackets and linkages for the engine drive. It does not include the engine or gearbox.

599-0179-2

Engine Selection - FF1 Engine only. This does not include any mounting brackets or the gearbox.	500-0387-1 (Honda )	500-0387-0 (Subaru)
Gearbox Kit - FF1 This kit is required when converting a hydraulic engine drive to a mechanical engine drive. This kit contains a gearbox, idler arm, tachometer bracket, and assorted pulleys. It does not include the engine mounting brackets or the engine (see above). There are no installation instructions available for this kit.	990-7068-0

40A 320,000 to 330,000 (FG1)

Drive Asm Conversion - FG1
This kit converts a turbine drive to a mechanical engine drive. It includes the mounting brackets and linkages for the engine drive. It does not include the engine or gearbox. These two numbers are needed to convert your machine from the large gearbox to the small gearbox with chain reduction.

990-7044-0KIT,Chain Drive Less Gearbox FG1

022-0439-3 Gearbox