Booster & Primary Pumps

Part of what makes the Kifco Water-Reels such an outstanding irrigation system, is the booster and primary pumps.

Select one of the categories below to see the technical specifications of the different types of pumps.

B-Series Booster Pump

B-Series Primary Pump

Ag-Rain Booster Pump

booster pump chartB-Series Primary Pump

The T200LSC is fitted with a 23Hp primary pump with external oil cooler and 12 Gallon Gas tank (high altitude jets if needed), automatic shut down, 30’ suction hose with strainer foot valve, primer pump, priming check valve, battery box and cables (battery not included). This pump provides 95 PSI at 100 GPM while overcoming 15 feet of suction lift.

Primary Pump Machine Compatibility Available Skid-Mount Self-Priming Gas Tank Capacity Fuel Consumption Run-Time per Tank
9 HP All B-Series
Only as skid mount Yes 6 Quart* 0.59 Gallons/Hr
2.5 Hours
18 HP All B-Series
Only as skid mount
No 6 Gallon
1.185 Gallons/Hr 5 Hours
23 HP T200 LSC
No No 12 Gallon
1.5 Gallons/Hr
8 Hours

* 9 HP Primary Pump comes standard with a 6 quart gas tank. Also available in 12 gallon tank.

 

9 HP chart

18 HP chart

23 HP chart

 

booster pump chartbooster pump chartB-Series Booster Pump

The B110 fitted with this in-line 110 Volt Electric booster pump offers greater flexibility to users with low or inconsistent flow and pressure. The lightweight 1HP electric pump comes standard with a flow switch that shuts off the pump when the irrigation cycle is complete or the water flow is terminated.

The pump is standard with a 1 1/4" female NPT inlet and a 1" female NPT outlet. Kifco has carefully researched and tested this pump to assure its compatibility and performance when mated with the Kifco Water-Reel. The 5.5 HP and 9 HP booster pumps are proven performers and have been incorporated into the Kifco line of products for over 15 years. These pumps really make the difference increasing pressure when top performance is required. These booster pump options can be factory mounted or field installed on any Water-Reel size B140 and above.

Pumps are connected with cam-lock fittings and can be easily bypassed if the Water-Reel is moved to a location where sufficient pressure is already present. Kifco incorporates a large gas tank to accommodate long run times to match your needs. Kifco equips these pumps with a thermo safety valve, plus an in-line switch to stop the engine when the water flow is insufficient.

Booster Pump Machine Compatibility Available Skid-Mount Gas Tank Capacity Fuel Consumption Run-Time per Tank
1 HP Electric
B/E110
No N/A N/A
N/A
5.5 HP Gas
Can be mounted to all B-Series except B/E110
No
6 Gallon
0.39 Gallons/Hr 15.4 Hours
9 HP Gas
Can be mounted to all B-Series except B/E110
No 6 Gallon
0.59 Gallons/Hr
10.1 Hours

booster pump chart

booster pump chart

 

 

ag-rain booster pumpAg-Rain Booster Pump

Kifco Ag-Rain model booster pump options will add the pressure needed to operate your Kifco Water-Reel to its optimum ability, when mounted directly to the Kifco Water-Reel. The 23 HP booster pump has an external oil cooler and with the added horsepower it becomes a nice fit for high altitude operation.

All gasoline powered pumps have factory installed safety relief valves. The pumps also come equipped with fuel tanks that are sized to operate the engine for the extended times needed to complete irrigation cycle and have an automatic shut down to stop the engine when the water flow is terminated. High altitude jets are available for all gas engine applications over 5,000 feet when requested.

Booster Pump Machine Compatibility Available Skid-Mount Gas Tank Capacity Fuel Consumption Run-Time per Tank
9 HP

T23x720

T27x980

T30x660

Yes
12 Gallon 0.59 Gallons/Hr
20.3 Hours
18 HP

T27x980

T30x660

T30x980

T30x1200

Yes
30 Gallon
1.185 Gallons/Hr 25.3 Hours
23 HP

T27x980

T30x660

T30x980

T30x1200

T33x1120

T37x1080

 

No 30 Gallon
1.5 Gallons/Hr
20 Hours

ag-rain booster pump

ag-rain booster pump

 

FaLang translation system by Faboba